Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Router Booting

Dear All,

             I have uploading a New IOS for 3845 router also i gave boot path.But it's not booting into new IOS & is going to old IOS,also we verified the checksum for new IOS.while booting below error we are getting

%SYS-6-READ_BOOTFILE_FAIL: tftp://255.255.255.255/:c3845-advipservicesk9-mz.124-24.T1.bin File read failed -- Timed out.

%SYS-6-READ_BOOTFILE_FAIL: tftp://255.255.255.255/:c3845-advipservicesk9-mz.124-24.T1.bin File read failed -- Timed out.

%SYS-6-READ_BOOTFILE_FAIL: tftp://255.255.255.255/:c3845-advipservicesk9-mz.124-15.T10.bin File read failed -- Timed out.

2 REPLIES
New Member

Re: Router Booting

Hello,msasikumar.

First,i don't why ur TFTP server address is 255.255.255.255,

then you should confirm:

Is the TFTP server up and running(Can you ping the TFTP server address from the router while running the current IOS successful )?

Is the file in the root directory of the TFTP server?
Is the filename spelled exactly correct ?
Is there enough RAM in the router to support the c3845-advipservicesk9-mz.124-24.T1.bin image?

Best regards!

sky.h

Hall of Fame Super Gold

Re: Router Booting

Instead of writing "boos system flash ", you wrote "boot system ", consequently router is trying to boot from TFTP.


Just make sure the image you want is the only one in flash and remove any boot statement.

388
Views
0
Helpful
2
Replies