Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Router Crashes when i configure my DSL dialer!

I have 3845, when i configure Dialer3 to connect through DSL, it crashes!

here is the show stack:

CMD: '' 11:54:07 UTC Wed Nov 15 2006

CMD: 'interface Dialer3' 11:54:10 UTC Wed

CMD: ' ip address negotiated' 11:54:10 UTC Wed Nov 15 2006

CMD: ' encapsulation ppp' 11:54:10 UTC Wed Nov 15 2006

CMD: ' dialer pool 3' 11:54:10 UTC Wed Nov 15 2006

CMD: ' dialer-group 3' 11:54:10 UTC Wed Nov 15 2006

CMD: ' peer default ip address dhcp' 11:54:11 UTC Wed Nov 15 2006

CMD: ' ppp authentication chap callin' 11:54:11 UTC Wed Nov 15 2006

CMD: ' ppp chap hostname xxxx' 11:54:11 UTC Wed Nov 15 2006

CMD: PASSWORD statement not printed

*Nov 15 11:54:12.252: %LINK-3-UPDOWN: Interface Dialer3, changed state to up

*Nov 15 11:54:12.696: %DIALER-6-BIND: Interface Vi2 bound to profile Di3

*Nov 15 11:54:12.700: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to up

*Nov 15 11:54:13.380: %SYS-5-CONFIG_I: Configured from console by sps on vty0 (x

xx.11.xxx.27)

*Nov 15 11:54:13.520: %DIALER-6-UNBIND: Interface Vi2 unbound from profile Di3

CMD: 'sh' 11:54:15 UTC Wed Nov 15 2006

11:54:16 UTC Wed Nov 15 2006: Address Error (load or instruction fetch) excepti

on, CPU signal 10, PC = 0x612D2570

-Traceback= 0x612D2570 0x60B927A8 0x6031BE48 0x6031C2EC 0x6030B66C

$0 : 00000000, AT : 62AE0000, v0 : 00000000, v1 : 00000000

a0 : 64760CE4, a1 : 0D0D0D0D, a2 : 00000001, a3 : 00000000

t0 : 63A2C6C8, t1 : 00000003, t2 : 3400C100, t3 : FFFF00FF

t4 : 607CEF08, t5 : 6377A7BC, t6 : 00000000, t7 : 635F1AE0

s0 : 639DEFF8, s1 : 62CEB3EC, s2 : 64760CE4, s3 : 0D0D0D0D

s4 : 62880000, s5 : 62870000, s6 : 631F2290, s7 : 631F228C

t8 : 63A1B5F4, t9 : 00000000, k0 : 30408001, k1 : B0020000

gp : 6288B480, sp : 631F21B0, s8 : 62A30000, ra : 60B927A8

EPC : 612D2570, ErrorEPC : BFC05CFC, SREG : 3400FF03

MDLO : 00000000, MDHI : 00000000, BadVaddr : 0D0D0D25

Cause 00000010 (Code 0x4): Address Error (load or instruction fetch) exception

=== Start of Crashinfo Collection (11:54:16 UTC Wed Nov 15 2006) ===

For image:

Cisco IOS Software, 3800 Software (C3845-IPBASE-M), Version 12.4(3d), RELEASE SO

FTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Wed 19-Apr-06 08:56 by alnguyen

========= Show Alignment =============================

Alignment data for:

3800 Software (C3845-IPBASE-M), Version 12.4(3d), RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 19-Apr-06 08:56 by alnguyen

Total Corrections 404286, Recorded 3, Reads 404286, Writes 0

Initial Initial

Address Count Access Type Traceback

2E9F5D49 3690 16bit read 0x60F2691C 0x6009BF60 0x6006F8A4 0x60064978

0x6088D1EC 0x601EDD40 0x601EFD28 0x601F3D0C

2E9F5D4F 3690 16bit read 0x60F26930 0x6009BF60 0x6006F8A4 0x60064978

0x6088D1EC 0x601EDD40 0x601EFD28 0x601F3D0C

2E9F5D49 3690 16bit read 0x6009A89C 0x6009C8E4 0x6006F8A4 0x60064978

0x6088D1EC 0x601EDD40 0x601EFD28 0x601F3D0C

Total Spurious Accesses 5344, Recorded 2

Address Count Traceback

68 2672 0x60AC5F6C 0x60AC4CB0 0x60AB11F4 0x60AB1920

0x60AB2268 0x60AB2420 0x60DC467C 0x60DC4AC8

68 2672 0x60AC60AC 0x60AC4CB0 0x60AB11F4 0x60AB1920

0x60AB2268 0x60AB2420 0x60DC467C 0x60DC4AC8

========= Malloc and Free Traces=====================

MallocFree Trace: ixmallocfree=0x2F ptr=0x629DA7F8

629DA680: 63D9B28C 60DC4CBC 63D9B28C

2 REPLIES
Silver

Re: Router Crashes when i configure my DSL dialer!

Hi ,

Can ypu paste show tech of the router ..which image is in the router.

Thanks,

satish

New Member

Re: Router Crashes when i configure my DSL dialer!

hi,

this is my show flash:

KAMC_NahdiTabuk#show flash all

-#- --length-- -----date/time------ path

1 15550756 Jul 03 2006 19:30:00 +00:00 c3845-ipbase-mz.124-3d.bin

2 1826 Jul 03 2006 19:37:22 +00:00 sdmconfig-38xx.cfg

3 4734464 Jul 03 2006 19:37:48 +00:00 sdm.tar

4 833024 Jul 03 2006 19:38:02 +00:00 es.tar

5 1052160 Jul 03 2006 19:38:16 +00:00 common.tar

6 1038 Jul 03 2006 19:38:30 +00:00 home.shtml

7 102400 Jul 03 2006 19:38:42 +00:00 home.tar

8 714850 Jul 03 2006 19:38:56 +00:00 256MB.sdf

9 1684577 Jul 03 2006 19:39:16 +00:00 securedesktop-ios-3.1.1.27-k9.pkg

show tech is giving me hundreds of pages, i dont know what to post relly!

i use 3845. i have a serial link, an NM 16 ports modem for call in, and a DSL interface.

some people told me that IOS may not support all the interfaces together, any idea?

318
Views
0
Helpful
2
Replies
CreatePlease to create content