I´m trying to implement a EEM with track state in a 1801 router with 12.4-4.T7 advanced ip services but the router is not showing syslog message as normaly "%TRACKING-5-STATE...." and the EEM don´t take the action.
Anyone kwons if this IOS version support this feature? I´ve alredy tried to enable all kind of logging in the router but it doesn´t work, after track is down, no message appear, link status logs is ok.
Is there some specific command to enable this kind of log?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...