Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Router Error

When I boot the 2600 router i receive the message below:

System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)

Copyright (c) 2000 by cisco Systems, Inc.

C2600 platform with 32768 Kbytes of main memory

open: file "/c2600-j1s3-mz.123-26.bin" not found

open(): Open Error = -1

loadprog: error - on file open

boot: cannot load "flash:/c2600-j1s3-mz.123-26.bin"

System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)

Copyright (c) 2000 by cisco Systems, Inc.

C2600 platform with 32768 Kbytes of main memory

boot: cannot determine first file name on device "flash:"

System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)

Copyright (c) 2000 by cisco Systems, Inc.

C2600 platform with 32768 Kbytes of main memory

boot: cannot determine first file name on device "flash:"

System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)

Copyright (c) 2000 by cisco Systems, Inc.

C2600 platform with 32768 Kbytes of main memory

rommon 1 >

3 REPLIES
Silver

Re: Router Error

It appears that you do not have a valid IOS image on the flash.

Here is a URL that demonstrates how to TFTP an image to a 2600. I have used this and it works very well.

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008015bf9e.shtml

Here is a URL describing boot problems and how to resolve them.

HTH

Silver

Re: Router Error

Silver

Re: Router Error

Here is some additional information about how to check flash from ROMMON mode to see what, if any, image is on the flash and boot from that image.

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a0080094a0b.shtml

123
Views
0
Helpful
3
Replies
CreatePlease to create content