Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Router for Channelized DS3.

Right now, I have 2 3662's with channelized T1 cards in them, running about 22 half T1's to the branch offices. I'm looking for a replacement router that can do Channelized DS3, to grow these offices to full T1's. I was looking at the 2851, but should I be looking higher at the 7300's?

4 REPLIES
Hall of Fame Super Silver

Re: Router for Channelized DS3.

Hello Mark,

I don't see a channelized DS3 module not even for C3845

see

http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8016a8e8.html

I would go for a C7204VXR that can install channelized Ds3 port-adapter

Use the following as a reference

http://www.cisco.com/en/US/docs/interfaces_modules/port_adapters/install_upgrade/multichannel_serial/channelized-t3_dual-wide_install_config/4584ct3d.html

Hope to help

Giuseppe

New Member

Re: Router for Channelized DS3.

I thought the 7200 was EOL soon?

What about the 7304?

Hall of Fame Super Silver

Re: Router for Channelized DS3.

Hello Mark,

I think it is EOL a 7206VXR with NPE 400 or less processor engine.

There are NPE-G1 and NPE-G2 processor engines and they are used, we have just bought two.

See

http://www.cisco.com/en/US/prod/collateral/routers/ps341/prod_end-of-life_notice0900aecd806b8c96.html

C7304 can be OK I haven't used it but I think it shares the PAs with 7200 so can be fine

Hope to help

Giuseppe

Re: Router for Channelized DS3.

422
Views
5
Helpful
4
Replies