Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

router for full bgp table 100Mbs

Hi all

what router would I be looking at to run bgp to the internet, receiving full table from the ISP, we currently use 100Mbit

Would a 2951 with 4 GIG of ram be OK?

 

cheers

 

  • WAN Routing and Switching
3 REPLIES
Silver

Definitely...i think that

Definitely...i think that 512MB is somekind of minimum for full BGP table.

BR,

Dragan

HTH, Dragan
Hall of Fame Super Gold

Would a 2951 with 4 GIG of

Would a 2951 with 4 GIG of ram be OK?

In my humble opinion, no.  

 

You'll probably need to look at a 3925E or 3945E.

Super Bronze

DisclaimerThe Author of this

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

For 100 Mbps, Cisco would recommend a 3925, see attachment.

93
Views
0
Helpful
3
Replies
This widget could not be displayed.