Router got Hung while copying file from one subnet to another
Hi Team ,
I am having two router one is 2611 router and another one is 1841. 2611 router is working as a primary router and 1841 router is working as a secondary backup router. In our network we have two subnet eg : 192 *.* and 172.16.*.*. Router got hung while transferring the huge file from subnet 192 network to 172.16th network. But everything working fine while transferring in same network.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...