09-12-2011 02:20 AM - edited 03-04-2019 01:34 PM
Hi All
when i try to saving down configs on router it gives the following mesg ..
R1(config)#wr
Attempting to overwrite an NVRAM configuration previously written
by a different version of the system image.
Overwrite the previous NVRAM configuration?[confirm]
Invalid Pointer value(4589AE30) in private configuration structure
*Sep 12 08:55:30.839: NV: Invalid Pointer value(4589AE30) in private configuration structure
Any idea...
Regards
Tash Bhat
Solved! Go to Solution.
09-12-2011 02:25 AM
Hi,
Did you perform an IOS upgrade before the error message?
Best regards
Giorgos
09-12-2011 03:18 AM
Dear Tabish,
Please do following steps.
1. Save old config template
2. erase startup-config
3. wr erase
4. reload
5. when ask would you like to initial config ?? N
6. paste Old config again
Sure then u will able to save without any errors
HTH
09-12-2011 02:25 AM
Hi,
Did you perform an IOS upgrade before the error message?
Best regards
Giorgos
09-12-2011 02:41 AM
Hi Giorgos
no i have not upgraded IOS yet
09-12-2011 02:52 AM
Hi Tash,
Check which IOS version you currently have by using the "sh flash:" command.
Then go to the global configuration mode using the "conf t" command and type
boot system flash:
Where
Best regards,
Giorgos
09-12-2011 03:00 AM
Hi Giorgos,
still it is showing the same mesg
Regards
Tash Bhat
09-12-2011 03:08 AM
Could you run the "sh ver" command and tell me what's your current configuration-register?
Thanks in advance,
Giorgos
09-12-2011 03:18 AM
Dear Tabish,
Please do following steps.
1. Save old config template
2. erase startup-config
3. wr erase
4. reload
5. when ask would you like to initial config ?? N
6. paste Old config again
Sure then u will able to save without any errors
HTH
09-12-2011 03:53 AM
THANKS A TON
HTH !!!
it is working fine now!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: