Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

router on stick

can anybody tell me what does router on stick means & how to config it with subneted network

2 REPLIES

Re: router on stick

Hi Friend,

Router in stick means intervlan routing using an external router.

You can configure your switch intetrface connecting to router as trunk and configure subinterfaces on router interface for different subnet with encapsulation dot1q command.

Check this link for more details and config guide

http://www.cisco.com/warp/public/473/50.shtml#801.1Q

HTH, if yes please rate the post.

Ankur

Re: router on stick

hi dhanraj,

Router on stick means you are confiugring the intervlan routing using the router connected with your switch which are having multiple vlan...

As we know different vlan can not communicate with each other directly...to make then communicate we need to have layer 3 functionality...so you can configre intervlan routing by the following way...

if your switch is layer3 then you do not need to have router, then at that time you configuring the intervlan routing on the switch bye creating switch virtula interface SVI...

but if your switch is not layer 3 and you want to make your vlan to be communicate with each other at that time you need to connect the router to switch and have to configure the router for the intervlan routing by creating multple sub interfacese on your router connected with the switch...and have to configure the trunking between the router and switch interface...

for more help look at this link: http://www.cisco.com/warp/public/473/50.shtml

hope this will help you

rate this post if it helps: http://www.cisco.com/warp/public/473/50.shtml

regards

Devang

127
Views
0
Helpful
2
Replies
CreatePlease login to create content