Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Router restart-serial line struck off

Dear all,

help me its urgent

our 2811 router is connecte to PSTN Telco for Provisioning

at Serial Line on 0/1/1 through smart serial for the following configuration

interface Serial0/1/1

physical-layer async

no ip address

encapsulation slip

async mode interactive

line 0/1/1

login authentication prov

transport input all

transport output all

telnet transparent

stopbits 1

flowcontrol software

------------------------------------

with the command

telnet 10.100.0.37 2019

i could not get the link, i have to clear line 0/1/1 or restart the router

is there any remedy other than this

----------------------------------------------

ports open are like this 2887,54729)no where there is 2019,

ROUTER#sh ip sockets

Proto Remote Port Local Port In Out Stat TTY OutputIF

17 --listen-- 10.100.0.43 2887 0 0 11 0

17 0.0.0.0 0 10.100.0.43 67 0 0 2211 0

17 10.193.208.183 53527 10.100.0.11 161 0 0 1 0

17 --listen-- 10.100.0.43 162 0 0 11 0

17 --listen-- 10.100.0.43 54729 0 0 1 0

17 10.193.208.181 162 10.100.0.11 49717 0 0 0 0

17 10.193.208.183 162 10.100.0.11 54603 0 0 0 0

Proto Remote Port Local Port In Out Stat TTY OutputIF

17 10.193.208.247 162 10.100.0.11 58347 0 0 0 0

17 10.193.208.249 162 10.100.0.11 49818 0 0 0 0

17 10.193.209.41 162 10.100.0.11 58574 0 0 0 0

17 10.193.209.5 162 10.100.0.11 55960 0 0 0 0

17 10.193.219.64 514 10.100.1.54 50341 0 0 210 0

17 10.193.212.112 514 10.100.1.54 50097 0 0 210 0

17 10.193.212.112 162 10.100.0.11 58766 0 0 0 0

Proto Remote Port Local Port In Out Stat TTY OutputIF

17 10.193.219.64 162 10.100.0.11 53191 0 0 0 0

---------------------------

any other command i have to give on serial to workout like

absolute-timeout Set absolute timeout for line disconnection

dispatch-timeout Set the dispatch timer

exec-timeout Set the EXEC timeout

lockable Allow users to lock a line

logout-warning Set Warning countdown for absolute timeout of line

notify Inform users

2 REPLIES
Hall of Fame Super Silver

Re: Router restart-serial line struck off

Hello Cisco_blue,

try

line 0/1/1

no exec

Hope to help

Giuseppe

Community Member

Re: Router restart-serial line struck off

no it isnt working,

any other remedies

280
Views
0
Helpful
2
Replies
CreatePlease to create content