Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Routers' Serial WAN Interfaces

Hi,

Can somebody please clarify to me the difference between the following modules:

1-WIC-2T: 2-Port Serial WAN Interface Card

2- WIC-2A/S: 2-Port Async/Sync Serial WAN Interface Card

Also, if I need 16-port serial module, do I need to order: HWIC-16A?

One last question: what does this module do: NM-32A?

Thanks,

Haitham

2 REPLIES

Re: Routers' Serial WAN Interfaces

2 port serial WIC (WIC-2A/S or WIC-2T)

- The only difference between the WIC-2A/S and the WIC-2T is the maximum

supported sync speed.

- Aysnc support with a max speed of 115.2 Kbps, minimum 600 bps (use the aux

port for lower speeds).

- WIC-2A/S Sync support with a max speed of 128 Kbps.

- WIC-2T Sync support with a max speed of 2.048 Mbps.

*********************************************

Yes,you need to have HWIC-16A in order to have 16-port Serial Module.

http://www.cisco.com/en/US/products/ps5949/products_data_sheet0900aecd80274416.html

**********************************************

For your last question click url below:-

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800a93f0.shtml

276
Views
0
Helpful
2
Replies
CreatePlease to create content