Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

routes are not exchanging

Hi,

I have two routers R1 and R2 configured for RIP but routes are not exchanging.Please find the confguration and show commands.

R1 Configuration

router rip

network 10.0.0.0

network 192.168.1

R2 Configuration

router rip

network 10.0.0.0

network 192.168.1

R1 show ip rip database

R1#sh ip rip database

10.0.0.0/8    auto-summary

10.15.1.0/24    directly connected, Loopback1

10.15.2.0/24    directly connected, Loopback2

10.15.3.0/24    directly connected, Loopback3

10.15.4.0/24    directly connected, Loopback4

10.15.5.0/24    directly connected, Loopback5

10.15.6.0/24    directly connected, Loopback6

10.15.7.0/24    directly connected, Loopback7

10.15.8.0/24    directly connected, Loopback8

10.15.9.0/24    directly connected, Loopback9

10.15.10.0/24    directly connected, Loopback10

10.15.11.0/24    directly connected, Loopback11

10.15.13.0/24    directly connected, Loopback13

10.15.14.0/24    directly connected, Loopback14

10.15.15.0/24    directly connected, Loopback12

10.15.16.0/24    directly connected, Loopback16

10.15.17.0/24    directly connected, Loopback17

10.15.18.0/24    directly connected, Loopback18

10.15.19.0/24    directly connected, Loopback19

10.15.20.0/24    directly connected, Loopback20

10.15.21.0/24    directly connected, Loopback21

10.15.22.0/24    directly connected, Loopback22

10.15.23.0/24    directly connected, Loopback23

192.168.1.0/24    auto-summary

192.168.1.0/24    directly connected, FastEthernet0/0

R2#sh ip rip database

10.0.0.0/8    auto-summary

10.12.1.0/24    directly connected, Loopback1

10.12.2.0/24    directly connected, Loopback2

10.12.3.0/24    directly connected, Loopback3

10.12.4.0/24    directly connected, Loopback4

10.12.5.0/24    directly connected, Loopback5

10.12.6.0/24    directly connected, Loopback6

10.12.7.0/24    directly connected, Loopback7

10.12.8.0/24    directly connected, Loopback8

10.12.9.0/24    directly connected, Loopback9

10.12.10.0/24    directly connected, Loopback10

10.12.11.0/24    directly connected, Loopback11

10.12.12.0/24    directly connected, Loopback12

10.12.13.0/24    directly connected, Loopback13

10.12.14.0/24    directly connected, Loopback14

10.12.15.0/24    directly connected, Loopback15

10.12.16.0/24    directly connected, Loopback16

10.12.17.0/24    directly connected, Loopback17

10.12.18.0/24    directly connected, Loopback18

10.12.19.0/24    directly connected, Loopback19

10.12.21.0/24    directly connected, Loopback21

10.12.22.0/24    directly connected, Loopback22

10.12.23.0/24    directly connected, Loopback23

192.168.1.0/24    auto-summary

192.168.1.0/24    directly connected, FastEthernet0/0

R1#sh ip protocols

Routing Protocol is "rip"

  Outgoing update filter list for all interfaces is not set

  Incoming update filter list for all interfaces is not set

  Sending updates every 30 seconds, next due in 29 seconds

  Invalid after 180 seconds, hold down 180, flushed after 240

  Redistributing: rip

  Default version control: send version 1, receive any version

    Interface             Send  Recv  Triggered RIP  Key-chain

    FastEthernet0/0       1     1 2                                 

    Loopback1             1     1 2                                 

    Loopback2             1     1 2                                 

    Loopback3             1     1 2                                 

    Loopback4             1     1 2                                 

    Loopback5             1     1 2                                 

    Loopback6             1     1 2                                 

    Loopback7             1     1 2                                 

    Loopback8             1     1 2                                 

    Loopback9             1     1 2                                 

    Loopback10            1     1 2                                 

    Loopback11            1     1 2                                 

    Loopback12            1     1 2                                 

    Loopback13            1     1 2                                 

    Loopback14            1     1 2                                 

    Loopback16            1     1 2                                 

    Loopback17            1     1 2                                 

    Loopback18            1     1 2                                 

    Loopback19            1     1 2                                 

    Loopback20            1     1 2                                 

    Loopback21            1     1 2                                 

    Loopback22            1     1 2                                 

    Loopback23            1     1 2                                 

    Loopback24            1     1 2                                 

    Loopback25            1     1 2                                 

    Loopback26            1     1 2                                 

    Loopback27            1     1 2                                 

    Loopback28            1     1 2                                 

    Loopback29            1     1 2                                 

    Loopback30            1     1 2                                 

  Automatic network summarization is in effect

  Maximum path: 4

  Routing for Networks:

    10.0.0.0

    192.168.1.0

  Routing Information Sources:

    Gateway         Distance      Last Update

    192.168.1.1          120      00:00:03

  Distance: (default is 120)

R2#sh ip protocols

Routing Protocol is "rip"

  Outgoing update filter list for all interfaces is not set

  Incoming update filter list for all interfaces is not set

  Sending updates every 30 seconds, next due in 18 seconds

  Invalid after 180 seconds, hold down 180, flushed after 240

  Redistributing: rip

  Default version control: send version 1, receive any version

    Interface             Send  Recv  Triggered RIP  Key-chain

    FastEthernet0/0       1     1 2                                 

    Loopback1             1     1 2                                 

    Loopback2             1     1 2                                 

    Loopback3             1     1 2                                 

    Loopback4             1     1 2                                 

    Loopback5             1     1 2                                 

    Loopback6             1     1 2                                 

    Loopback7             1     1 2                                 

    Loopback8             1     1 2                                 

    Loopback9             1     1 2                                 

    Loopback10            1     1 2                                 

    Loopback11            1     1 2                                 

    Loopback12            1     1 2                                 

    Loopback13            1     1 2                                 

    Loopback14            1     1 2                                 

    Interface             Send  Recv  Triggered RIP  Key-chain

    Loopback15            1     1 2                                 

    Loopback16            1     1 2                                 

    Loopback17            1     1 2                                 

    Loopback18            1     1 2                                 

    Loopback19            1     1 2                                 

    Loopback21            1     1 2                                 

    Loopback22            1     1 2                                 

    Loopback23            1     1 2                                 

    Loopback24            1     1 2                                 

    Loopback25            1     1 2                                 

    Loopback26            1     1 2                                 

    Loopback27            1     1 2                                 

    Loopback28            1     1 2                                 

    Loopback29            1     1 2                                 

    Loopback30            1     1 2                                 

  Automatic network summarization is in effect

  Maximum path: 4

  Routing for Networks:

    10.0.0.0

    192.168.1.0

  Routing Information Sources:

    Gateway         Distance      Last Update

    Gateway         Distance      Last Update

    192.168.1.2          120      00:00:04

  Distance: (default is 120)

R1#sh ip route

Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP

       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

       E1 - OSPF external type 1, E2 - OSPF external type 2

       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

       ia - IS-IS inter area, * - candidate default, U - per-user static route

       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     10.0.0.0/24 is subnetted, 22 subnets

C       10.15.5.0 is directly connected, Loopback5

C       10.15.4.0 is directly connected, Loopback4

C       10.15.7.0 is directly connected, Loopback7

C       10.15.6.0 is directly connected, Loopback6

C       10.15.1.0 is directly connected, Loopback1

C       10.15.3.0 is directly connected, Loopback3

C       10.15.2.0 is directly connected, Loopback2

C       10.15.13.0 is directly connected, Loopback13

C       10.15.15.0 is directly connected, Loopback12

C       10.15.14.0 is directly connected, Loopback14

C       10.15.9.0 is directly connected, Loopback9

C       10.15.8.0 is directly connected, Loopback8

C       10.15.11.0 is directly connected, Loopback11

C       10.15.10.0 is directly connected, Loopback10

C       10.15.21.0 is directly connected, Loopback21

C       10.15.20.0 is directly connected, Loopback20

C       10.15.23.0 is directly connected, Loopback23

C       10.15.22.0 is directly connected, Loopback22

C       10.15.17.0 is directly connected, Loopback17

C       10.15.16.0 is directly connected, Loopback16

C       10.15.19.0 is directly connected, Loopback19

C       10.15.18.0 is directly connected, Loopback18

C    192.168.1.0/24 is directly connected, FastEthernet0/0

R1#

2#sh ip route

Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP

       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

       E1 - OSPF external type 1, E2 - OSPF external type 2

       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

       ia - IS-IS inter area, * - candidate default, U - per-user static route

       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     10.0.0.0/24 is subnetted, 22 subnets

C       10.12.6.0 is directly connected, Loopback6

C       10.12.7.0 is directly connected, Loopback7

C       10.12.4.0 is directly connected, Loopback4

C       10.12.5.0 is directly connected, Loopback5

C       10.12.2.0 is directly connected, Loopback2

C       10.12.3.0 is directly connected, Loopback3

C       10.12.1.0 is directly connected, Loopback1

C       10.12.14.0 is directly connected, Loopback14

C       10.12.15.0 is directly connected, Loopback15

C       10.12.12.0 is directly connected, Loopback12

C       10.12.13.0 is directly connected, Loopback13

C       10.12.10.0 is directly connected, Loopback10

C       10.12.11.0 is directly connected, Loopback11

C       10.12.8.0 is directly connected, Loopback8

C       10.12.9.0 is directly connected, Loopback9

C       10.12.22.0 is directly connected, Loopback22

C       10.12.23.0 is directly connected, Loopback23

C       10.12.21.0 is directly connected, Loopback21

C       10.12.18.0 is directly connected, Loopback18

C       10.12.19.0 is directly connected, Loopback19

C       10.12.16.0 is directly connected, Loopback16

C       10.12.17.0 is directly connected, Loopback17

C    192.168.1.0/24 is directly connected, FastEthernet0/0

R2#

PLEASE CHECK WHAT COULD BE THE REASON THAT ROUTES ARE NOT EXCHANGING

THANKS

CCNA        

CCNA :)
  • WAN Routing and Switching
4 REPLIES

routes are not exchanging

Hello.

I guess the issue is: you are using RIPv1 and auto-summary is in place.

Purple

routes are not exchanging

Hi,

hardcode RIPv2 and disable auto-summary and you'll see the loopbacks advertised by RIP on each router.

router rip

version 2

no auto-summary

Now for the explanation: each router is sending 10.0.0.0/8 network as the update is crossing a major network boundary and RIPv1 autosummarizes in this case.

When the other RIPv1 router receives this 10.0.0.0/8 it looks if it has already  network subnets part of this classful network known on other interfaces which is the case here and so it ignores  the update.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
New Member

routes are not exchanging

Hi Thanks for your reply.....

If i configure rip version 2 summarized address is recieved from both side and both network can ping each other.

But if i configured version 1 summraized address is not recieving i dont know what is the issue .

Whenever if i dont confgure no auto summary at version2 by default its Autosummary is on.(but still recieved summary address from both side)

and rip version 1 have only auto summary on.(but summmary address is not recieved)

CCNA :)

CCNA :)
Purple

routes are not exchanging

Hi,

But if i configured version 1 summraized address is not recieving i dont know what is the issue .

I answered in my previous post:

When the other RIPv1 router receives this 10.0.0.0/8 it looks if it has  already  network subnets part of this classful network known on other  interfaces which is the case here and so it ignores  the update.

This is how RIPv1 behaves, now in RIPv2 by default it also autosummarizes but it is now a classless protocol(not a classful one) and so it accepts the 10.0.0.0/8 network.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
117
Views
4
Helpful
4
Replies
This widget could not be displayed.