Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Routing and VPN for HSEC 1841 router

Hi,

I got a 1841 router with 2 ethernet port and HSEC IOS.I have terminating broadband connection in bridge mode and got the public ip for myself (i.e 122.16.81.X/24).

Requirement:

1.Want to allow my internal network 192.168.1.0/24 to go out the internet.

2. Would like to create site to site VPN with remote office(public IP 59.162.65.X/29 and private IP 192.168.16.0/24).

Anyone can guide on Nat,Access list and rest of the IKE and IPSEC parameters will be highly appriciated.

Reg,

Sushil

1 REPLY

Re: Routing and VPN for HSEC 1841 router

access-list 100 permit ip 192.168.1.0 0.0.0.255 any

ip nat pool test source list 100 interface overload

interface

ip nat inside

interface

ip nat outside

If you want to be more specific, you can tweak the access-list to allow only WWW traffic.

For site to site VPN, take a look here

http://www.cisco.com/en/US/products/ps9403/products_configuration_example09186a00800b4b40.shtml

http://www.cisco.com/en/US/products/ps9403/prod_configuration_examples_list.html

HTH

Narayan

91
Views
5
Helpful
1
Replies