Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Routing between 2 networks

Have 2 offices connected by a 2MB fiber connection. Cisco 1720 and 1721 on each end. Office 1, 10.147.28.xxx, Office 2, 10.223.112.xxx network. Recently users on the 10.223 network would run an RDP session to a terminal serve ron the 10.147 network with no problem. This server died and now we have a temporary Windows XP box in place for the server. I can RDP to the server but I need to be able to connect to the XP box and transfer files. From the 10.223 network I can ping the machine but I can't connect to a file share. Is there something on the router that I need to do in order to pass the traffic between the two?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Routing between 2 networks

Hello Steven,

on lan interface of site 1 add

ip helper-address

windows tries to broadcast to access shares so you convert it to a routable packet

Hope to help

Giuseppe

3 REPLIES
Hall of Fame Super Silver

Re: Routing between 2 networks

Hello Steven,

on lan interface of site 1 add

ip helper-address

windows tries to broadcast to access shares so you convert it to a routable packet

Hope to help

Giuseppe

New Member

Re: Routing between 2 networks

Curious...what does the ip helper-address command do?

New Member

Re: Routing between 2 networks

Please disregard, I figured out my issue as soon as I posted

112
Views
0
Helpful
3
Replies