Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Routing Calls Through Serial Ports

I have three AS5300 Access Gateways. Right now i am using one of them and routing my calls thru serial port. The serial port of this is connected to the VSAT modem. Now i want to divide this further into two more Acess Gateways i.e. VSAT modem connected to one of the serial port of one AS5300 and then other two serial ports conneted to the serial port on another two access gateways.

Please let me know that can we route the calls in this way and if yes what would be the likely configuration.

Robin Malhotra

3 REPLIES
Bronze

Re: Routing Calls Through Serial Ports

New Member

Re: Routing Calls Through Serial Ports

Thanks for your response. I am attaching the netwok topology i am trying to use. In this we have two AS5300 access gateways named SMINDS 1 and SMINDS 2. The one named VSAT is our VSAT modem. Now SMINDS 1 is connected to this VSAT modem through serial 0. And then we have two of our servers connected to this router thru E1. Now i want to use another AS5300 access gateway SMINDS 2.And connect it to SMINDS 1 through Serial interface. In that way the two servers will be connected to two independent routers. So how do i connect two routers i.e. SMINDS 1 and SMINDS 2 through serial ports. Please let me know if you can help me with the configuration also. Can i connect the two routers with a simple DCE cable ? If yes then will the calls get routed from Router 2 to router 1 ?

Please let me know as soon as possible.

Thanks

Robin Malhotra

New Member

Re: Routing Calls Through Serial Ports

Please if anybody knows how to do it please let me know as soon as possible.

88
Views
0
Helpful
3
Replies
CreatePlease login to create content