01-30-2014 07:30 PM - edited 03-04-2019 10:13 PM
Hello Guys,
Is it possible to route fast ethernet interfaces of Cisco 2811 and Cisco 1841 routers? Do I have to check for its compatibility or some additional configs that make them able to route, as well as ping.
Thank you.
Chris
Solved! Go to Solution.
02-11-2014 03:39 PM
Hi Rick,
Ethernet adapter Local Area Connection:
Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connection
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::c08a:ab20:c99c:8834%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.100.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, February 12, 2014 7:24:52 AM
Lease Expires . . . . . . . . . . : Thursday, February 13, 2014 7:24:52 AM
Default Gateway . . . . . . . . . : 192.168.100.253
DHCP Server . . . . . . . . . . . : 192.168.100.3
DHCPv6 IAID . . . . . . . . . . . : 285221324
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-FB-FE-B6-00-21-CC-BB-A5-77
DNS Servers . . . . . . . . . . . : 192.168.100.3
192.168.1.6
NetBIOS over Tcpip. . . . . . . . : Enabled
The PING your are trying to confirm are all correct.
Thank you and hope you can help me guys.
Regards,
Chris
02-12-2014 09:26 AM
Chris
Thank you for the additional information. As a test would you try this and tell us if the behavior changes
interface FastEthernet0/1
no service-policy input Block_Traffic
HTH
Rick
02-15-2014 04:05 AM
Hi Rick,
Thanks for helping me. I will let you know once I configure that.
Regards,
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide