Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Routing issue in BGP

Hi Guys, 

I having a problem on configurate a routing to let my 2.0/24 go out to the external BGP cloud via 116.1 router. Here i have attached the current network diagram. 

How do I able to see 172.16.2.0/24 in my bgp list? 

 

1, Do I need to let my 172.16.2.0./24 router able to ping 172.16.116.2 router?

2, in 172.16.116.2, do it need to add the network 172.16.2.0/24?

 

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

the bgp router must have some

the bgp router must have some sort of connection to the IGP domain.

currently the BGP router doesnot even know where 172.16.2.0/24 is.

you can run an igp between your bgp router and advertise the route or you can put in a static route on the bgp.

once the bgo router will get to know route it will show up in the BGP table and it will also start advertising it as well.

2 REPLIES
New Member

the bgp router must have some

the bgp router must have some sort of connection to the IGP domain.

currently the BGP router doesnot even know where 172.16.2.0/24 is.

you can run an igp between your bgp router and advertise the route or you can put in a static route on the bgp.

once the bgo router will get to know route it will show up in the BGP table and it will also start advertising it as well.

New Member

Sorry for late reply.  Thanks

Sorry for late reply. 

 

Thanks man, I able to published 2.0/24 in ibgp. 

64
Views
10
Helpful
2
Replies