Hii Everybody,
I have recently upgraded my Internet connection from 2*2 mbps multilink to 10 Mbps Internet line where RJ45 ethernet input given in Giga ethernet 1 . I have connected my Giga ethernet 2 to my firewall .
I have simply assigned WAN ip on Ethernet 1 and my first avalable ip from public ip pool on ethernet 2 . and the next available ip on firewall WAN port .
Assigned a default route towards WAN ip of my service provider .
Do I need to make any other changes here , Do i need to add any access-list here , as i am new to WAN do let me know with example .
Also let me know do i need to get in touch my service provider in adding any additional configuration .
!INTERFACE AND SUB-INTERFACE
interface GigabitEthernet 1
description " Internet Link 10Mbps "
ip address 1.1.1.2 255.255.255.252
no shutdown
interface GigabitEthernet 2
description " *** Connected to Firewall *** "
speed 100
duplex full
ip address x.x.x.x 255.255.255.248
no shutdown
interface GigabitEthernet 3
description " *** Standby & Testing *** "
ip address 192.168.1.1 255.255.255.0
no shutdown
!IP
ip route 0.0.0.0 0.0.0.0 1.1.1.1
Regds,
Max
