Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started.

New Member

Routing problem between ASA and 2651

I'm having a routing problem between an ASA and a couple of lab routers.

I think the problem is related to firewall/security rules on the ASA, but the packet tracer in ASDM says that nothing should be getting dropped.

I have not configured any additional security rules on the ASA. (full config attached)

I feel like I'm missing something simple here....


ASA inside network is

R2 is connected directly to the ASA and Fa0/0 has an IP of

R2 fa0/1 is directly connected to R1 fa0/1 via x-over cable.

R1 fa0/0 is then connected to a switch.

My computer is connected to the ASA.

From my computer I can sucessfully ping R1 and R2 using any of its IP addresses, but I can only telnet to R2 using

If I try to telnet from my computer to any of the other IP addresses ( it times out.

I have the following static routes set:

! ASA (full config in attached file)

route inside 1
route inside 1


ip route


ip route

More config for all three in the attached file.

Please let me know if there is any other config I can post that would help.



  • WAN Routing and Switching