Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

routing table

1. This is a routing table, what is this network topology ?

C 192.168.1.96/27 is directly connected, Serial1

C 192.168.1.98/32 is directly connected, Serial1

C 192.168.1.64/27 is directly connected, Serial0

C 192.168.1.66/32 is directly connected, Serial0

R 192.168.1.33/32 [120/1] via 192.168.1.98, 00:00:05, Serial1

R 192.168.1.32/27 [120/1] via 192.168.1.66, 00:00:07,Serial0

R 192.168.1.34/32 [120/1] via 192.168.1.66, 00:00:07, Serial0

2. what does 192.168.1.96/27 mean?

3. what does 192.168.1.98/32 mean?

2 REPLIES
Silver

Re: routing table

192.168.1.98/32 is the loopback ip.

192.168.1.96/27 is the network address which is directly attached.

R means routes coming from RIP network.

regards

shivlu

Re: routing table

When you use PPP, the Cisco IOS will automatically create a /32 route for the neighbor by default

Hence you see 2 network statements, one is the /32 address and the other is the attached network

If you want to disable this feature configure the following command under the interface

no peer neighbor-route

http://www.cisco.com/en/US/docs/ios/11_3/dial/configuration/guide/dcppp.html#wp6109

HTH

Narayan

118
Views
4
Helpful
2
Replies
CreatePlease to create content