Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Routing thru l2 switch

hi all,

i have my Routers two interface configured on vlan 200 ip 10.80.8.2,

which are connected to me 3400  ,

inturn connected to a switch ip 192.168.1.35&then to server 192.168.1.201

i have tried giving routes for 192.168.1.35,192.168.1.0 coldnt get on

2 REPLIES

Re: Routing thru l2 switch

Hi,

Is there a default route is configured in switch toward the router if not just configured a default route towards the router intreface and check.

Hope the helps out your query !!

Regards

Ganesh.H

Hall of Fame Super Silver

Re: Routing thru l2 switch

Hello Cisco_blue,

or  the routers or the ME 3400 need to have a layer 3 interface in IP subnet 192.168.1.0, that  IP address can become the next-hop for default gateway on server and L2 switch. It is not enough to have a physical connection between L2 switch and the other devices.

Hope to help

Giuseppe

270
Views
0
Helpful
2
Replies
CreatePlease to create content