Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Routing Traffic from secondary network through VPN tunnel

  • What we have is a VPN connection on the Cisco 881 router, the LAN/VLAN1 can ping and access everything through the VPN tunnel.
  • The VPN tunnel is a dynamic tunnel so that the Cisco 881 does not have to be behind a static IP.  The tunnel is built with networks 10.x.x.0/16 & 192.168.x.0/24 network.
  • The RV042 has a DMZ IP that cannot change and must be 10.5.60.1.  I need to be able to have the LAN traffic of the RV042 be able to send files through the VPN connection.
  • The main issue I have right now is trying to translate the traffic in the 881 router from the 10.5.60.0/26 network to the 192.168.x.0/24 network so that it can pass traffic though the VPN.

Gilbarco Current.jpg

Addition Info:

There will be multiple sites thus I need the 192.168.x.0 for translation.

Everyone's tags (3)
395
Views
0
Helpful
0
Replies
CreatePlease to create content