Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

routing update and OQS

hello dear networkers;

I have two routers and a wireles link between them.the wireless APs are L2 devices. they have four queue for QOS.

so,I mark the packets from my router with COS to make qos.

I have three class of users..GOLD,SILVER,BRONZE

so i mark the pakket from GOLD with cs7 then silver with cs1 and bronze with CS0

so my question is that what will happend with my routing updates between my routers ( according that GOLD users will be in priority queue)??

thank you

1 REPLY

Re: routing update and OQS

Routing update traffic are generally marked with dscp cs6 & cs7.

This will be placed in the appropriate queue as per your configuration.

My suggestion would be to have a seperate policy for this control traffic while using assured and expedite forwarding for the rest

eg

lass-map match-any WAN-BED1

match ip dscp cs1

match ip dscp af11

class-map match-all WAN-VOICE

match ip dscp ef

class-map match-all WAN-VIDEO

match ip dscp af41

class-map match-any WAN-SILVER

match ip dscp af21

match ip dscp cs4

class-map match-any WAN-GOLD

match ip dscp af31

class-map match-all WAN-NETWORKCONTROL

match ip dscp cs6 cs7

policy-map WAN-EDGE

class WAN-VOICE

priority percent 20

class WAN-VIDEO

bandwidth percent 13

class WAN-NETWORKCONTROL

bandwidth percent 3

class WAN-GOLD

bandwidth percent 15

class WAN-SILVER

bandwidth percent 19

set dscp af21

class WAN-BED1

bandwidth percent 30

HTH

Narayan

137
Views
0
Helpful
1
Replies
CreatePlease to create content