This really helps and after working with it a while I really like the concept. I was able to get one of my interfaces routing OK, but the Local Private LAN is not. Here is the Routing config I currently have.
ip address 67.xxx.xxx.65 255.255.255.224
ip policy route-map INETLAN
ip address 192.168.21.1 255.255.255.0
ip policy route-map ELGINLAN
no routing dynamic
access-list 1 permit 192.168.21.0 0.0.0.255
access-list 2 permit 172.16.0.0 0.3.255.255
access-list 3 permit 172.20.0.0 0.3.255.255
access-list 5 permit any
access-list 6 permit 192.168.33.0 0.0.0.255
access-list 23 permit 10.10.10.0 0.0.0.7
route-map ELGINLAN permit 10
match ip address 1 2 3 6
set ip next-hop 192.168.21.4
set ip default next-hop 192.168.21.2
route-map INETLAN permit 10
match ip address 5
set ip next-hop 67.xxx.xxx.125
When doing a trace route to a public address, for instance 220.127.116.11 from behind the FE0/1 interface, the default route is not wanted to kick in. 192.168.21.1 is the default gateway for the workstation I am doing this from. Here is what the results look like:
or sometimes they come back starting with 192.168.21.4 as the first hop, assuming my machine is using the arp info.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.