Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

routing

My internal networks of 10.6.1.0 and 10.6.10.0 are unable to connect to the internet. Here is the config.

Am I missing a route?

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: routing

Hello,

Under the interfaces, you have not enabled NAT.

interface FastEthernet0/0

description $ETH-WAN$

ip address aaa.bbb.ccc.212 255.255.255.248

ip nat outside -- Missing

duplex auto

speed auto

!

interface FastEthernet0/1

description Internal

ip address 10.6.1.251 255.255.255.0

ip nat inside -- Missing

duplex auto

speed auto

!

Hope this helps.

Regards,

NT

2 REPLIES
Cisco Employee

Re: routing

Hello,

Under the interfaces, you have not enabled NAT.

interface FastEthernet0/0

description $ETH-WAN$

ip address aaa.bbb.ccc.212 255.255.255.248

ip nat outside -- Missing

duplex auto

speed auto

!

interface FastEthernet0/1

description Internal

ip address 10.6.1.251 255.255.255.0

ip nat inside -- Missing

duplex auto

speed auto

!

Hope this helps.

Regards,

NT

New Member

Re: routing

Exactly. Thanks.

160
Views
0
Helpful
2
Replies