Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

RSP 720 booting errors

Hi

I can see many errors when the 7606 with  RSP720-3c booting up.

u can find the booting ups logs in Attached file

below are some of the errors:

whats wrong?!

thanks

--------------------------------------------------------

rommon 1 > boot

Initializing ATA monitor library...

string is bootdisk:c7600rsp72043-adventerprisek9-mz.122-33.SRC6.bin

Initializing ATA monitor library...

Stack pointer       : 0x40000000

monstack            : 0x040088BC

monra               : 0x00000000

edata : 0x300084E0

magic : 0xFEEDFACE

memsize             : 0x40000000

uncomp_size         : 0x07491400

comp_size           : 0x07491400

comp_checksum       : 0xCF3E4697

uncomp_checksum     : 0xCF3E4697

CZIP_MEM_BASE       : 0x00000000

_end       : 0x30008500

Self extracting the image...

IOS compressed src copy is     : 0x300084F4

czip + IOS tar size is :0x00A19830

czip + IOS Tar image is now :0x300086F4

cptr is now :0x30008600

IOS compressed dest copy is     : 0x30008600

[OK]

image_entry :0x30000000

image_entry :0x30000000

__start : 0x30000000

tar_avail_size is now :0x06A77800

Tar image address is             : 0x30A22000

tar_size is           : 0x06A77400

cpu type                   : 0x000000AC

uncomp_size                : 0x07491400

monstack                   : 0x040088BC

image_info.entry_point   = 0x30000000

image_info.section_count = 0x00000004

image_info.monstack      = 0x040088BC

image_info.monra         = 0x00000000

image_info.param0        = 0x00000002

image_info.param1        = 0x00000000

image_info.param2        = 0x00000000

image_info.param3        = 0x00000000

image_info.reg_k0        = 0x30A22000

image_info.reg_k1        = 0x06A77400

Section Index = 0x00000000

    source    = 0x300086F4

    dest      = 0x30000000

    bytes     = 0x00008000

Section Index = 0x00000001

    source    = 0x300106F4

    dest      = 0x30008000

    bytes     = 0x00000670

Section Index = 0x00000002

    source    = 0x30010D64

    dest      = 0x30008670

    bytes     = 0x00000010

Section Index = 0x00000003

    source    = 0x30010D74

    dest      = 0x30008680

    bytes     = 0x00A110BC

reg_v0: 0x00000000

reg_k0: 0x30A22000

reg_k1: 0x06A77400

tar_start: 0x00000000

tar_size: 0x00000000

Tar image address is             : 0x30A22000

tar size is :0x009A163D

Tar magic : ustar Tar filename : C2LC memsize             : 0x40000000

Tar gid         : 035231Tar uncomp_size         : 0x009A163D

Tar mtime         : 11345216526 Tar username          : pallavikTar comp_checksum       : 0x00001425

Tar group name    : buildTar prefix    : tar_size  in czip         : 0x06A77400

Stack pointer       : 0x40000000

monstack            : 0x040088BC

monra               : 0x00000000

edata : 0x30008680

magic : 0xFEEDFACE

memsize             : 0x40000000

uncomp_size         : 0x04F5204C

comp_size           : 0x00A110A5

comp_checksum       : 0x248ACE2E

uncomp_checksum     : 0x7CD58FCD

Compressed IOS src copy is     : 0x30008694

tar_dest is :0x39580400

tar_size is :0x06A77400

Compressed IOS dest copy is     : 0x38B6F358

Tar src before IOS decompression is     : 0x30A22000

Tar dest before IOS decompression is     : 0x39580400

compressed IOS  src is     : 0x38B6F358

IOS uncompressed dest copy is     : 0x30030C80

Self decompressing the image : ########################################################################################################################################################################################################################### [OK]

e_shoff :

0x04F51EE4

e_flags : 0x00000000

e_phnum :

0x00000001

Source elf_hdr->e_shnum = 0x00000009

Setting up to copy ELF section 0x00000001

to image_info section 0x00000000

sh_name = 0x0000000B

sh_type = 0x00000001

sh_flags = 0x00000007

sh_addr = 0x08000000

sh_offset = 0x00000060

sh_size = 0x04000000

sh_link = 0x00000000

sh_info = 0x00000000

sh_addralign = 0x00000020

sh_entsize = 0x00000000

Setting up to copy ELF section 0x00000003

to image_info section 0x00000001

sh_name = 0x00000019

sh_type = 0x00000001

sh_flags = 0x00000003

sh_addr = 0x0C000000

sh_offset = 0x04000060

sh_size = 0x00F1827C

sh_link = 0x00000000

sh_info = 0x00000000

sh_addralign = 0x00000008

sh_entsize = 0x00000000

Setting up to copy ELF section 0x00000004

to image_info section 0x00000002

sh_name = 0x0000001F

sh_type = 0x00000001

sh_flags = 0x00000003

sh_addr = 0x0CF1827C

sh_offset = 0x04F182DC

sh_size = 0x00000004

sh_link = 0x00000000

sh_info = 0x00000000

sh_addralign = 0x00000004

sh_entsize = 0x00000000

sh_type = 0x00000008

sh_flags = 0x00000003

sh_addr = 0x0CF18280

sh_offset = 0x04F182E0

sh_size = 0x0000671C

sh_type = 0x00000008

sh_flags = 0x00000003

sh_addr = 0x0CF1E99C

sh_offset = 0x04F182E0

sh_size = 0x0203651C

tar file start = 0x0EF5CEB8

cpu type                   : 0x0000002C

uncomp_size                : 0x04F5204C

monstack                   : 0x040088BC

image_info.entry_point   = 0x08000000

image_info.section_count = 0x00000004

image_info.monstack      = 0x040088BC

image_info.monra         = 0x00000000

image_info.param0        = 0x00000002

image_info.param1        = 0x00000000

image_info.param2        = 0x00000000

image_info.param3        = 0x00000000

image_info.reg_k0        = 0x0EF5CEB8

image_info.reg_k1        = 0x06A77400

Section Index = 0x00000000

    source    = 0x30030CE0

    dest      = 0x08000000

    bytes     = 0x04000000

Section Index = 0x00000001

    source    = 0x34030CE0

    dest      = 0x0C000000

    bytes     = 0x00F1827C

Section Index = 0x00000002

    source    = 0x34F48F5C

    dest      = 0x0CF1827C

    bytes     = 0x00000004

Section Index = 0x00000003

    source    = 0x39580400

    dest      = 0x0EF5CEB8

    bytes     = 0x06A77400

data_size  in czip         : 0x00008000

bss end of IOS is         : 0x0EF54EB8

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706

Cisco IOS Software, c7600rsp72043_sp Software (c7600rsp72043_sp-ADVENTERPRISEK9-M), Version 12.2(33)SRC6, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

Compiled Mon 08-Mar-10 10:49 by prod_rel_team

Image text-base: 0x080000B8, data-base: 0x0C000000

*Jan  1 00:21:34.507: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

*Jan  1 00:21:27.503: CM file (ivfs:/c7600rsp72043_sp-adventerprisek9-m_matrix.cm) is not readable, using internal matrix table

*Jan  1 00:21:34.507: %PFREDUN-6-STANDBY: Initializing as STANDBY processor

*Jan  1 00:22:16.195: %SYS-SP-STDBY-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

*Jan  1 00:21:34.859: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.

Firmware compiled 14-Jul-09 15:31 by integ Build [100]

*Jan  1 00:22:16.195: %OIR-SP-STDBY-6-CONSOLE: Changing console ownership to route processor

Everyone's tags (3)
1 REPLY
Hall of Fame Super Gold

RSP 720 nvram problem

Already discussed in another thread, please do not post duplicates.

367
Views
0
Helpful
1
Replies