RSP720-3C-GE / 7606 reload

[Ahmed Erfan Mehdi]

Hi Experts,

Kindly, our node 7606 has been reloaded due to below log:

%CONST_DIAG-SP-2-HM_SUP_CRSH: Supervisor crashed due to unrecoverable errors, Reason: Failed TestSPRPInbandPing

(c7600rsp72043_rp-ADVIPSERVICES-M), Version 12.2(33)SRB2

Please advise.

Regards,

Ahmed Erfan

[Jairo Osorio]

I have the same problem with a 7606 router here is the output:

system power redundancy mode = redundant
system power redundancy operationally = non-redundant
system power total =     2669.10 Watts (63.55 Amps @ 42V)
system power used =       615.30 Watts (14.65 Amps @ 42V)
system power available = 2053.80 Watts (48.90 Amps @ 42V)
                        Power-Capacity PS-Fan Output Oper
PS   Type               Watts   A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1    PWR-2700-DC        2669.10 63.55  OK     OK     on 
2    none
                        Pwr-Allocated  Oper
Fan  Type               Watts   A @42V State
---- ------------------ ------- ------ -----
1    FAN-MOD-6HS         180.18  4.29  OK
                        Pwr-Requested  Pwr-Allocated  Admin Oper
Slot Card-Type          Watts   A @42V Watts   A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
4    WS-X6548-GE-TX      125.16  2.98   125.16  2.98  on    on
5    WS-SUP32-GE-3B      154.98  3.69   154.98  3.69  on    on
6    unknown             154.98  3.69   154.98  3.69  on    on