Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RSVP not connected

I am setting up the first agent for my RSVP configuration, and when doing a sh sccp i get this. Showing I failed to register with CCM. I am running CM5.1 using IOS c2800nm-spservicesk9-mz.124-11.T1.bin on a 2811 gateway.I have a MTP on CM called "MTPEast2". Any ideas why it fails to register?

Thanks Dan

East-2811-1#sh sccp

SCCP Admin State: UP

Gateway IP Address: 10.1.130.2, Port Number: 2000

IP Precedence: 5

User Masked Codec list: None

Call Manager: 10.1.130.11, Port Number: 2000

Priority: N/A, Version: 5.0.1, Identifier: 1

Call Manager: 10.1.130.10, Port Number: 2000

Priority: N/A, Version: 5.0.1, Identifier: 2

Call Manager: 10.1.140.10, Port Number: 2000

Priority: N/A, Version: 5.0.1, Identifier: 3

Software MTP Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REGISTER_FAILED

Active Call Manager: 10.1.130.11, Port Number: 2000

TCP Link Status: NOT_CONNECTED, Profile Identifier: 20

Reported Max Streams: 200, Reported Max OOS Streams: 0

Supported Codec: g711ulaw, Maximum Packetization Period: 30

Supported Codec: pass-thru, Maximum Packetization Period: N/A

Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30

Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30

Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period

: 30

RSVP : ENABLED

3 REPLIES
Bronze

Re: RSVP not connected

add the following cmds:

sccp

auto-config application sccp

server ip-address

exit

auto-config

for more info see:

http://www.cisco.com/en/US/products/sw/iosswrel/ps5413/products_feature_guide09186a00805ae839.html#wp1245747

New Member

Re: RSVP not connected

The auto-config command does not work in the 2811 router.

Re: RSVP not connected

Your attachment expired so I am just guessing here... The Cisco's brief help document for RSVP agent says you must add 'version 5.1' to the 'sccp ccm' command. It also says you must use IOS version 12.4(4)T or greater.

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/int_rsvp.html

Please help us make the communities better. Rate helpful posts!
255
Views
0
Helpful
3
Replies