Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

RTR and SLA

Hi, WHat is the difference between RTR and SLA. I found both are similar, I want to know the differences.

3 REPLIES
Hall of Fame Super Silver

Re: RTR and SLA

Rupesh

It is my understanding that they really are the same. After introducing the feature Cisco changed the name in later releases as some additional functionalities were added. So the difference is versions of code where each is found.

HTH

Rick

New Member

Re: RTR and SLA

I think u r right, as I m finding same command in both. RTR is new one.

Super Bronze

Re: RTR and SLA

I thought RTR was the "old" and "SLA" the new?

[edit]

Above was based on my memory, but just found this reference: http://www.cisco.com/en/US/docs/ios/ipsla/command/reference/sla_book.html

If you look at some of the chapters, notes such as

"Note Effective with Cisco IOS Release 12.3(14)T and 12.2(31)SB2, the show rtr history command is replaced by the show ip sla monitor history command. Effective with Cisco IOS Release 12.2(33)SRB, the show rtr history command is replaced by the show ip sla history command. See the show ip sla monitor history and show ip sla history commands for more information. "

appear common (from: http://www.cisco.com/en/US/docs/ios/ipsla/command/reference/sla_04.html#wp1077354).

3700
Views
0
Helpful
3
Replies