I have a customer that is running a small business with 5 systems running windows xp pro. The problem is I'm trying to setup PC Anywhere but I can't access the system through the router. I setup port management and I have been working with Symantec for this problem. They claim it might be the router causing the problem. With this problem they are also compaining about 2 of the 5 systems are running very slow on the internet. They are running Comcast Broadband. I ran speed test with down at 68 which is above what they should be getting. But I do see the problem they are talking about.
I hope some one can help and get back to me ASAP>.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...