Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RV082 dual wan Terminal Server configuration

Hello to all,

Thanks in advance for your help.

I've a RV082 with 2 internet connections.

The idea is to permit external connections to my server and if one Internet line falls, automatically switch to the other.

We have configured the router in Smart Link backup

We try to connect with WAN1 and WAN2 enabled and all works fine.

We try to connect with WAN1 disabled and automatically WAN2 is activated.

The problem start here...if WAN1 is activated while there are connections using WAN2, these connections falls!!

How I must configure the router to permit that active connections are not disconnected from WAN2 even when WAN1 connection come back ?

Thanks in advance.

Everyone's tags (1)
1 REPLY
New Member

RV082 dual wan Terminal Server configuration

I forget this information...

Firmware Version : v4.0.4.02-tm (Jul 4 2011 13:30:56)
492
Views
0
Helpful
1
Replies
CreatePlease login to create content