we are trying to connect to a DSL modem over a Cisco rv082. The configuration for the WAN seems alright, we can ping everything on the internet over the web admin of the rv082. However, as soon as we plug something into the LAN port of the rv082, it becomes unreachable (approximately after 10 seconds). The only way to reach it again is to unplug the WAN or the LAN and do a hard reset. This only happens when the WAN and the LAN port are plugged in at the same time.
I'm not sure if our configuration is alright, however we tried almost every possible setting. Can this be a configuration issues, or is the rv082 faulty?
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...