Finding accurate answers to your questions and issues is always gratifying, but what if these answers are shared globally across different languages? The Cisco Community team has been working on a proof of concept (PoC) to take Accepted Solutions in...
Greetings,The customer has 2 BGP links towards us, separated dual homed (PE1-CE1 & PE2-CE2), who is asking why they are receiving traffic on link No.1 even they have already configured route-map to deny all routes imported from & exported to PE1. The...
From the business aspect, why would we recommend a client to use sdwan vs mpls or dedicated lines
What are the advantages of using ADVPN vs a full-mesh? Please need support. Thanks
The host for my current server (Windows Hyper-V machine with four or five VMs) that handles my email and web sites is going away. I'm planning on moving that physical server to my house and using DDNS to route that traffic in. Realize this is very lo...
What is the multicast address used by BGP to operate
So I've been working on my project and I've implemented vlans nad also router stick.Now I want to block connections between vlans that are not same with extended access list but something does not work..Here are the commands that I've writtenip acces...
I have some branch locations with a simple set up. A router with an access switch connected to it, then another access switch connected to that one to provide POE to IP phones. Currently all devices are in the same VLAN.I also have an access point co...
Could you please help me? I've tried to make a connection from a dhcp server to a linksys router, I've configured the router that separates the two networks, but I don't understand why it doesn't work, the goal is to connect to a web server, but it's...
Hello,we have deployed pair of 9500-32C in Stacwise-virtual. It is Aggregation node of big site and connecting to backbone by 2 EBGP links (one from each switch).I have noticed long downtime during ISSU and as we are deploying more of these to other ...
In the video 'All you need to know about ISR Fixed Branch Platforms' there is a mention of 'dynamic core allocation' on the ISR1100 platform.Starting from IOS-XE 17.6 this would appearantly allow the Service Core to be set up as a Dataplane Core, all...
Hi,I am unable to add an AutoNAT rule to a 2nd Public IP part of our ISP block of 6 hosts.I have multiple servers in DMZ where I want to translate each to a different Public IPCan only Nat to the Destination Interface IP, and not to a new Address Pub...
Hi All,I have 2 networks connected via OSPF. I need to route the connected networks to a third network via BGP.I noticed that BGP peering is established but no entry is visible on the routing table.Below is an extract of BGP config:router bgp 65200.1...
Hello everyone!We have ASR1001x with fullview and ipsec tunnels. We use local policy to forward packets from PA addresses to their respective gateways. When the traffic load is high PBR stop working and the router starts using cef, when there is litt...
Hi Community, Iam creating Smart license in IOSXR with http So I used "destination transport-method http" and also put the destination url. When I do show run, i see "destination transport-method email disable" also in the configuration ----- call-ho...
Hi can anyone tell how to check Cisco 8300 series edge platform router hardware throughput verification command or any table for base license as well as booster.
