Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

Same Subnet across WAN

Guys

we have an application that needs to be on a specific IP and subnet. we have all local clients working, however, the customer wants to have remote branches connect to the system. the vendor has advised that the remote clients must be on the same subnet for this to work.

how can i acheive this using the Wide area network?

would bridging be applicable for this?

thanks in advance for all the responses.

3 REPLIES
Hall of Fame Super Blue

Re: Same Subnet across WAN

Arvind

There are a number of approaches but the "cleanest" way in my opinion is to use L2TPv3 which allows you to extend a L2 vlan across L3 routed links -

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtl2tpv3.html

Jon

Bronze

Re: Same Subnet across WAN

Guys

thanks a lot

Hall of Fame Super Bronze

Re: Same Subnet across WAN

L2TPv3 if your routers support it.

HTH,

__

Edison.

507
Views
7
Helpful
3
Replies