Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SAMI 12.4.22 (YE) not set 'autonomous flag ' in prefix options of IPv6

We have configured according to document 12490cfg_release_9.pdf

As the Ipv6 stateless autoconfiguration :

====================

interface Virtual-Template10

mtu 1280

no ip address

ipv6 enable

ipv6 nd prefix default infinite infinite off-link

no ipv6 nd ra suppress

ipv6 nd ra lifetime 21600

ipv6 nd ra interval 21600

ipv6 nd ra initial 3 4

end

=======================

But once sending to Mobile the autoconfiguration is not ‘set’

Options

- Type: MTU

- Length: 8 (08h)

- Value: 1280

- Type: Prefix Information

- Length: 32 (20h)

- Prefix length: 64 (40h)

- On-link flag not set

- Autonomous address-configuration flag not set

- Router flag not set

- Reserved 1: 00h

- Valid lifetime: 2592000 s

- Preferred lifetime: 604800 s

- Reserved 2: 00 00 00 00

- Prefix: 2001:236:     :

===========================================

We are using version: System image file is "c7svcsami-g8ik9s-mz.124-22.YE.bin"

2 REPLIES
New Member

Re: SAMI 12.4.22 (YE) not set 'autonomous flag ' in prefix opti

"ipv6 nd prefix " seems never work under virtual-template, I have changed to many options but the value of L and A still the same '0' in routing-adverstise..

New Member

Re: SAMI 12.4.22 (YE) not set 'autonomous flag ' in prefix opti

fixed!!

511
Views
0
Helpful
2
Replies
CreatePlease login to create content