Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SDM is not showing SERIAL interfaces in itself

Hi guys,

I am using SDM for checking the CPU utilization and Memory usage.

But when i check the INTERFACE STATUS in MONITOR mode, Only GigabitEthernet interface is showing with its bandwidth utilisation not any Serial Interface is displaying.

I want that Serial Interface connected to my Router with Multilink interface will display.

Any suggestion.

Sunny Rathore

3 REPLIES
Hall of Fame Super Gold

Re: SDM is not showing SERIAL interfaces in itself

Hello,

SDM has serious limitations in doing many things and quite possibly this is one of them (multilink).

For professional configuration and monitoring of cisco devices, please use CLI and traditional SNMP tools.

New Member

Re: SDM is not showing SERIAL interfaces in itself

Thanks for the info.

I am agree with you.

Sunny

New Member

Re: SDM is not showing SERIAL interfaces in itself

Anyone find a fix for this? I have the same issue with SDM 2.4.1 on a 2800 series router.

SDM sees the serial interfaces in Montor Overview, and you can configure them in "Configure", but Interface Status won't let you monitor traffic. You'd think this would be a common [sense] need.

155
Views
0
Helpful
3
Replies