Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

SDM Not working

I have cisco rouer 3825 but unable to access via SDM. Please see the configuration in attachement. i tried with https, http and via SDM loaded. getting page cant be displayed.

Please help me out

4 REPLIES
Community Member

Re: SDM Not working

Can you access the device through telnet. One thing I do see is under vty there is not a "login local" entry. Here is a link for SDM

http://www.cisco.com/univercd/cc/td/doc/product/software/sdm/sdmqsg/sdmq21.htm#wp51612

Community Member

Re: SDM Not working

In addition to login local, you will also need to specify privilege level 15 when configuring the VTY lines.

Community Member

Re: SDM Not working

Hi,

Try following:

1. connect one PC to 192.168.32.0 segment. the IP address of PC is 192.168.32.10/24

2. launch IE

3. key in: https://192.168.32.2

You should get the login promopt.

BTW, pls check the 802.1q setting.

rdgs

Community Member

Re: SDM Not working

Make sure java is installed on your PC and ip http server is also enabled on your router.

117
Views
0
Helpful
4
Replies
CreatePlease to create content