Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Secondery Ip To serial

Dear sirs,

Its regarding the serial IP addresing.

sir,

is it possible to give the 2 ip address to a serial ?

if yes then please give the procedure.

with rtegards

sanju kumar

3 REPLIES
Cisco Employee

Re: Secondery Ip To serial

Hello Sanju,

interface Serial0/1

ip address 30.1.1.1 255.255.255.0 secondary

ip address 20.1.1.1 255.255.255.0

Regards,

Arul

*Pls rate if it helps*

New Member

Re: Secondery Ip To serial

Dear Arul,

i tried this on 3600 series of router but it gives me the follwing error message" /24 is bad subnet mask"

the commands are :

router(config)#ip address 172.16.1.0 255.255.255.0

router(config)#ip address 172.16.2.0 255.255.255.0 secondary

/24 is bad subnet mask .

please give solution for the above.

with regards

sanju.

New Member

Re: Secondery Ip To serial

Sanju,

172.16.2.0 /24 is network id for this pool..

Try 172.16.2.1 /24 as secondary ip.

HTH !

106
Views
5
Helpful
3
Replies