Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Segregate terminal server traffic

We are implementing a terminal server implementation, and we are also adding a point to poitn link, so we will have two t1 point to point links for this location. We have a 3825 at the central office with Enterprise services IOS 12.4, and a 2801 with Enterprise Services IOS 12.4 at the remote location.

We are wanting to route all the Terminal services traffic (port 3389) to one of the t1s, and all the rest of it to the other connection. Any tips on how to accomplish this efficiently?

Thanks in advance.

1 REPLY
Hall of Fame Super Blue

Re: Segregate terminal server traffic

Hi

Policy Based Routing would allow you to do this. It allows you to override the routing table and control which way you want your traffic to go.

Attached is a link to PBR on IOS 12.4

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a008075fae6.html

HTH

Jon

96
Views
0
Helpful
1
Replies