08-07-2006 04:44 AM - edited 03-03-2019 01:34 PM
Hi everybody
I know that wic solt has serial port with 2mb speed but someone aksed me about port with 4mb bandwidth .could you pls help me that what module I can select?
thanks
08-07-2006 04:53 AM
if you want 4mb bandwidth from one SERIAL port, you'll have to get a HSSI, (highSpeedSerialInterface) for your router.
also, you can 'bundle' multiple T1s.
see the following links on HSSI:
http://www.cisco.com/en/US/products/hw/modules/ps3129/products_tech_note09186a00800946d8.shtml#s3600
see the following link on PPP multilink T1 bundling:
http://www.cisco.com/en/US/tech/tk713/tk507/technologies_configuration_example09186a00800a3b85.shtml
08-07-2006 04:58 AM
you can use HSSI or PPPmultilink bundle of the two serial interface for 4 MB bandwidth on serial interface...
rate this post if it hleps
regards
Devang
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide