Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Serial Speeds

Hi

i have to know the speed of the various serial interface for all speed and connection that use with cisco product

10xs

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Serial Speeds

Hi Ali,

We call T1/E1 interface as "T1, E1, and G.703 Multiflex Trunk Voice and WAN Interface Cards"

WIC1T/2T support upto 2Mbps on each port.

http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheet09186a0080091b8b.html

With NM,It depends which NM module you are using with the WAN interface card on it. Please see the diff NM's and the WAN cards you can put in the NM slots.

http://www.cisco.com/en/US/products/ps5854/products_relevant_interfaces_and_modules.html

-amit singh

6 REPLIES

Re: Serial Speeds

Not sure if I got everything, here are the serial that I use and know;

T1 = 1.544 Mbps

E1 = 2.048 Mbps

T3 = 45 Mbps

E3 = 34 Mbps

http://www.cisco.com/en/US/products/hw/modules/ps2033/products_white_paper09186a0080091d4b.shtml

New Member

Re: Serial Speeds

Hi

10xs for ur reply;i mean what is the name of interface that run:

T1 = 1.544 Mbps

E1 = 2.048 Mbps

T3 = 45 Mbps

E3 = 34 Mbps

WIC 1T/2T

NM????

10XS FOR UR INFO

Re: Serial Speeds

here you can have all information of all types of interface and modules:

http://www.cisco.com/en/US/products/hw/modules/prod_module_category_home.html

ali i will reply to your mail today evening...

regards

Devang

New Member

Re: Serial Speeds

Hello Devang 10xs for ur reply

Cisco Employee

Re: Serial Speeds

Hi Ali,

We call T1/E1 interface as "T1, E1, and G.703 Multiflex Trunk Voice and WAN Interface Cards"

WIC1T/2T support upto 2Mbps on each port.

http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheet09186a0080091b8b.html

With NM,It depends which NM module you are using with the WAN interface card on it. Please see the diff NM's and the WAN cards you can put in the NM slots.

http://www.cisco.com/en/US/products/ps5854/products_relevant_interfaces_and_modules.html

-amit singh

New Member

Re: Serial Speeds

HI amit singh!

Thanks a lot for ur reply

113
Views
9
Helpful
6
Replies
CreatePlease login to create content