You must route the traffic upstream and downstream (From A to B to C, and then from C to B to A), static routing needs Hop by Hop static configuration on both traffic directions.
When talking about the next-hop, its not defaulted to 1, it should be the IP address of the next router in the path (The AD is the number which is defaulted to 1, you can increase it in order to have backup routes - Floating static routes).
I hope that i've been informative, and please don't hesitate if you have further questions.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...