Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

set precedence vs. set ip precedence

Which difference between command

set precedence and

set ip precedence?

NNOV_EQ_2811(config-pmap-c)#set ?

atm-clp Set ATM CLP bit to 1

cos Set IEEE 802.1Q/ISL class of service/user priority

discard-class Discard behavior identifier

dscp Set DSCP in IP(v4) and IPv6 packets

fr-de Set FR DE bit to 1

ip Set IP specific values

mpls Set MPLS specific values

precedence Set precedence in IP(v4) and IPv6 packets

qos-group Set QoS Group

NNOV_EQ_2811(config-pmap-c)#set ip ?

dscp Set IP DSCP (DiffServ CodePointint)

precedence Set IP precedence

1 REPLY
New Member

Re: set precedence vs. set ip precedence

The set ip precedence command is for IPv4 where set precedence is for both IPv4 & IPv6 .

Best regards

1266
Views
5
Helpful
1
Replies