seting up frame relay

[cisco steps]

I did not know where this should be posted , may be here will get some answeres

I am trying to set a frame relay lab so I can create the cloud and proceed with my BCSI exam training. I have

2 x 2610 with 2 serial interfaces

1 x 2510 w/ 2 serial interfaces

2 x 2900 XL switches

Please help

Thanks

[Edison Ortiz]

With just 2 routers, the best you can do is back-to-back FR.

This article should be able to help you:

http://www.cisco.com/en/US/tech/tk713/tk237/technologies_configuration_example09186a0080094a3b.shtml

You can look into Dynamips as an alternative option for your studies.

HTH,

__

Edison.

[cisco steps]

that is 3 router 2510 is one of them

[jimmysands73_2]

Your third router can act as the fr switch. This page might also be helpful:

http://www.ciscopress.com/articles/article.asp?p=170741&seqNum=7

http://www.cisco.com/en/US/docs/ios/12_1/wan/configuration/guide/wcdfrely.html#wp1002491

and

http://www.thebryantadvantage.com/Frame%20Relay%20Switch.htm

Good luck,

Jimmy