Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SH/NO SH!!

Dear NetPro!

sh ip interface brief;int s0/0 up Protocole Down

action have been taken:int s0/0

sh

no sh

than the Interface goes Up until the next day.next day the same action have taken...plz exprts explain this issue ,and how to solve it?

10xs

3 REPLIES

Re: SH/NO SH!!

Ali,

Have a look at this link on troubleshooting serial line problems

http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00800a758d.shtml

HTH, rate if it does

Narayan

Silver

Re: SH/NO SH!!

first, try "show log" and see why the interface went down.

If the log is too short, issue (config)#logging buffered 128000 informational, and wait for it to disconnect again.

New Member

Re: SH/NO SH!!

Hi

10xs for ur great Replys

172
Views
10
Helpful
3
Replies