Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

sh policy-map output

Hello,

could somebody please explain what does

router#sh policy-map int GigabitEthernet0/0.15 out

GigabitEthernet0/0.15

  Service-policy output: policy1

...

        Class-map: Class-map1 (match-any)

          36699 packets, 5431222 bytes

          30 second offered rate 5000 bps, drop rate 0 bps

          Match: access-group name ACL1

            336 packets, 22512 bytes

            30 second rate 0 bps

          Match: access-group name ACL2

            36363 packets, 5408710 bytes

            30 second rate 5000 bps

          Queueing

          queue limit 64 packets

          (queue depth/total drops/no-buffer drops) 0/0/0

          (pkts output/bytes output) 36699/5438950

          bandwidth remaining 37% (13 kbps)

            Exp-weight-constant: 1 (1/2)

            Mean queue depth: 0 packets

output mean?

The GigabitEthernet0/0.15 subinterface has bandwidth 4000 kbps configured (as well as GigabitEthernet0/0 interface).

There is one priority class configured with 512 kbps reserved.

I believe "bandwidth remaining 37% (13 kbps)"  does not mean "bandwidth remaining 37% = 13 kbps"

So where does this 13 kbps come from?

The router is 2901 running c2900-universalk9-mz.SPA.151-2.T4.1  IOS.

Thanks,

Milan

Everyone's tags (2)
248
Views
0
Helpful
0
Replies