Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Shape average question

Hi All.

A customer of mine is trying to configure shape-avarage on a policy map to 200M.

The maximum shape avarage the IOS is letting him configure is 154.4/

The IOS image at use is c3825-adventerprisek9-mz.124-6.T6.bin

Have anyone encountered such a problem??

Everyone's tags (3)
2 REPLIES
Silver

Shape average question

Can you post output from the CLI? What is the interface bandwidth set to?

Daniel Dib
CCIE #37149

Daniel Dib CCIE #37149 Please rate helpful posts.

Shape average question

My first thought is that you are hitting the 75% limit on the interface. If your bandwidth is set to 200M on the interface, you'll only be able to shape out to 75% of the bandwidth by default which is 150Mb. You can change this by setting "max-reserved-bandwidth 100" on the interface and then you should be able to shape to 100% of the interface bandwidth. As Daniel stated, if you're still having issues after this, please post the config of the interface and your policy.

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
159
Views
0
Helpful
2
Replies