cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
960
Views
0
Helpful
4
Replies

Shape sustained burst (bc) cannot be configured this interface

Hi, Im trying to apply something like this in interface "GigabitEthernet over SIP-400:

!

class-map match-all SHAPING

match any

!

policy-map SHAPE-1000

class SHAPING

shape average 1000000000 10000000 0

but is no possible because the BC...

"Shape sustained burst (bc) cannot be configured this interface"

there is another way to apply the policy map? The router is a 7604.

Thanks in advance.

4 Replies 4

Laurent Aubert
Cisco Employee
Cisco Employee

Hi,

Configuring Bc value is not supported on the SIP-400. You need to let the router calculate it for you (do not enter any value).

HTH

Laurent.

Hi Laurent, humm dont work on the SIP-400, but I also have GLCs... 2 ports at GigaEthernet, if I apply do them dont work also :) is normal?

Thanks one more time.

fzamora
Cisco Employee
Cisco Employee

Changing Bc is not supported on sip-400 shaping. If you want to control

buffering you can configure queue-limit on the shaping class.

Franco

Thanks for your answer.

The Link is 1Gb, can I apply:

!

class-map match-all SHAPING

match any

!

policy-map SHAPE-1000

class SHAPING

bandwith 1000

queue-limit 10

!

10 for queue-limit is ok?

Thanks in advance.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: