Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Shape sustained burst (bc) cannot be configured this interface

Hi, Im trying to apply something like this in interface "GigabitEthernet over SIP-400:

!

class-map match-all SHAPING

match any

!

policy-map SHAPE-1000

class SHAPING

shape average 1000000000 10000000 0

but is no possible because the BC...

"Shape sustained burst (bc) cannot be configured this interface"

there is another way to apply the policy map? The router is a 7604.

Thanks in advance.

4 REPLIES
Cisco Employee

Re: Shape sustained burst (bc) cannot be configured this interfa

Hi,

Configuring Bc value is not supported on the SIP-400. You need to let the router calculate it for you (do not enter any value).

HTH

Laurent.

New Member

Re: Shape sustained burst (bc) cannot be configured this interfa

Hi Laurent, humm dont work on the SIP-400, but I also have GLCs... 2 ports at GigaEthernet, if I apply do them dont work also :) is normal?

Thanks one more time.

Cisco Employee

Re: Shape sustained burst (bc) cannot be configured this interfa

Changing Bc is not supported on sip-400 shaping. If you want to control

buffering you can configure queue-limit on the shaping class.

Franco

New Member

Re: Shape sustained burst (bc) cannot be configured this interfa

Thanks for your answer.

The Link is 1Gb, can I apply:

!

class-map match-all SHAPING

match any

!

policy-map SHAPE-1000

class SHAPING

bandwith 1000

queue-limit 10

!

10 for queue-limit is ok?

Thanks in advance.

551
Views
0
Helpful
4
Replies