09-24-2005 08:48 PM - edited 03-03-2019 10:34 AM
hi all
i want to connect 2 different offices distance is around 800mts, i have 2 pair(4 wire) copper cable from one office to another i would like to use G.SHDSL using 1841 routers.i want to deploy these cards in back to back fashion. kindly post your suggetions.
Regds
Binoy.
09-24-2005 10:32 PM
Hello Binoy,
basically, you will need to configure one of your routers as CO, and the other as CPE.
Have a look at the following document, it has sample configs for the back-to-back setup. Although 828 and 2612 routers are used in this example, the setup should work with 1841 routers as well:
Configuring CPE Back-to-Back Through G.SHDSL Ports
http://www.cisco.com/warp/public/794/dsl_cpe_config.html
HTH,
GP
09-24-2005 11:34 PM
hi GP thanks for your input.
ok configuration part is ok.is there any bottleneck,i mean any technical issues you can see in this.
Regds
Binoy.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide